Vectaire HEATREC1003HT Single Room Heat Recovery Ventilator

Product Summary:

3 Speed centrifugal fan for any domestic wet room
Energy efficient EC motors
Efficient, low energy solution to controlling condensation and pollution
Provides low level continuous ventilation with summer bypass and frost-stat
Up to 75% heat exchange efficiency
Choice of two low (trickle) speeds
Speed can be boosted by user
Low noise levels and running costs
Compliant with building regulations parts l1 2013 and f 2013

General:

Single room heat recovery unit for new build or refurbishment
for areas up to 40m²
Up to 75% of heat recovered
Easy to install and maintain
For installation into walls – can be rotated to four positions
Two low (trickle) speeds
Speed 1: 5 litres/sec
speed 2: 7.5 litres/sec
boost speed (15 litres/sec) triggered by user with integral pull-cord or a remote switch
Tube heat recovery cell available in 400mm, 500mm or 600mm lengths
Heat recovery tube incorporates condensate drainage and weather louvre
Termination kit enables complete installation from inside (easy to install in high rise buildings)
Low noise levels
Low running costs
Extra security – no need to open windows

Specification

Efficient and economical
Casing from shockproof, high quality technopolymer
Low energy ec motors
Operates in temperature up to 40ºc
Easy to maintain
Filters and heat exchanger removable and washable
Summer bypass – the heatrec1003 has sensors which monitor the air in-take and extract. When the outside temperature is comfortable and the inside ambient temperature is lower than 18ºc, the air extract motor will be automatically switched off, whilst the air intake motor will continue to operate, ensuring a quick and efficient change of air inside the room. When the outside temperature is higher than 26ºc, the air intake motor will be switched off to ensure entilation without increasing the temperature.
Integral frost-stat – the unit is fitted with an internal thermostat, which automatically stops the air intake if there is a risk of the heat exchanger freezing up (when the outside temperature is too low) and also avoiding the intake of very cold air.

Compliance

Part l1 2013 of building regulations for enhanced energy saving capability
Part f 2013 of building regulations for reliable, efficient ventilation
EU rohs directive compliant. • Iec 60335-2-80, bt 2006/95/ce and emc 2004/108/ce european directive against radio interference and electro-magnetic compatibility
CE marked