Rytons Floor Ventilator with louvre
- Room ventilator utilising air from a ventilated sub-floor void.
- Mirror polished solid brass louvre grille provides a stylish appearance.
- Inverted louvres give a flush finish.
- Brass coloured screws included.
- BBA approved – your independent assurance that the product meets building regulations and standards and will last.
Free Area
11000mm² (110cm²) per set.
Size
267mm L x 95mm H x 125mm D.
See our image gallery above for a dimensional drawing. AutoCAD drawing available by email.
Installation
1. Cut an opening in the floor and insert sleeve (sleeve can be trimmed with a fine-tooth saw to reduce the depth if required).
2. Fasten louvre through pre-formed holes in the flange around the sleeve using screws provided.
3. Peel off the protective film.
4. Note: When installing in an uncarpeted floor the flange may be trimmed back slightly and the louvre ventilator screwed into the floor to maintain as flush a finish as possible.
5. Important: In areas where radon gas has been identified as a problem, ventilation shall not be taken from the space below ground floor level (e.g. using a floor vent), or interfere in any way with any remedial measures already in place to prevent radon gas entering the habitable part of the dwelling.
UK Regulations and Standards
The Building Regulations, Approved Document J.
The Building (Scotland) Regulations, Mandatory Standard 3.21.
The Building Regulations (Northern Ireland),
Technical Booklet L. British Standard BS 5440-2:2009.
For venting, decorative fuel effect gas fires refer to British Standard BS 5871-3:2005.
Handling Information
Box quantity: 1 set.
Box size: 28cm W x 11cm H x 14.5cm D.
Box weight: 0.39kg.
Reviews
There are no reviews yet.